Setting up the camera in the barn:
1. Use the clamping base or the permanent bracket to mount the camera, the clamping base can be clamped on any pole or board which is less than 2 ¼” diameters thick. Choose the mounting spot (as high as it is allowed) and tighten the clip bolt on the clamping base. 2. Plug the 110 / 240v AC adapter into the power outlet and to the camera. 3. Attach the antenna 5 pins connector to the camera, tighten the pin screw. 4. Loose the tilt lock knob, adjust the camera, point it in the direction where you wish to monitor, tighten the tilt lock knob. 5. Position the camera booster antenna (outdoor preferred) as high as possible. The antenna has a magnet base, you may stick it any steel face. Or you can mount it permanently with a screw. 6. Arrange the antenna cable neatly.
Setting up the monitor in the house or office
1. Attach the monitor to the desktop mounting bracket. 2. Attach the 7 pins connector antenna to the monitor. 3. Position the monitor booster antenna (outdoor preferred) as high as it is allowed. The antenna has a magnet base, you may stick it to any steel surface. Or you can mount it permanently with a screw. 4. Plug the 110 /240V AC adapter into the power outlet and monitor. 5. To turn on the monitor—Press the “POWER” button. 6. Switch to the correct channel, coordinate with your camera’s channel. To switch channel- Press the “CH” (Channel) button , cycle through the channels. There are 8 channels to cycle through. Once the correct channel is found, the screen will show the object you are monitoring. 7. Arrange the monitor power wire and the antenna cable neatly
|
Recording the moment onto your computer
Trailer Eyes® TE-0811 B2 Video Recording Device (Sold separately)
Model# TE-0811-USB - Wireless Video Grabber
|
Introducing:
A recording device to make the Trailer Eyes B2 set even more useful in a variety of situations. Whether you are using the 5.8 GHz wireless camera to monitor a mare in foal, a trouble spot on your farm or an exciting hunting event, you can use TE-0811-USB Wireless Video Grabber to record the video image onto your computer. The places and occasions to use Trailer Eyes® are unlimited.
Requirements:
* IBM compatible PC running Windows SE ME, 2000, Vista, XP, Window 7 * One open USB port * Honestech VHS to DVD 2.0 SE Image software (included the installation disc) * Trailer Eyes® TE-0811-USB recording device * Trailer Eyes® TE-0811 B2 Camera with booster antenna (included in TE-0811 set) * Trailer Eyes® TE-0811 B2 Monitor/receiver booster antenna (included in TE-0811 set)
|
Trailer Eyes® has been reviewed by Mr. Truck. As seen on RFD TV
|
|